© Powered by SiteSpirit
Switch to: Heiden Tuning / MikesXS
Select product, add to shopping bag and be sure to fill out the CORRECT address!
Shipping 0-5 kg is €15,00 for inside the EU.
Ask for the shipping price outside the EU!
Minimum order amount is 15 euro! Shipping within Europe free (< 5 kg) on orders 150 euro and up.
Sélectionnez les articles, ajoutez les dans votre panier et remplissez votre adresse CORRECTE.
Les frais de port sont de 15€ pour des marchandise de 0 à 5 kg en Europe.
Pour une expédition hors Europe, demandez nous les frais de port!
Le montant minimum dúne commande est de 15€ !
Les frais de port pour l'Europe sont gratuits pour des colis inférieurs à 5 kg et dont le montant est supérieur à 150€.
#05-0001 - Gasket Cement
 Gasket Cement - 3-Bond #4 (Yamabond #4) - 100gram tube - Gray semi-drying type.
|
#HT-0298 - Gasket Vesrah Complete Set
 XS650 SJ 82 XS650 SK 83 XS650 (1U3) 79 XS650 (1U3) 80
|
#18-0208 - Premium '72-'84 XS650 Gasket Set
 Overhaul Gasket Set - Fits: 1972-84 650's - Sets made by Athena of Italy the of Italy the European original equipment supplier to Yamaha, Honda, Kawasaki, Suzuki and all major Italian bike makers. Top Quality ISO-9000 approved premium gasket kits. Athena...
|
#18-0652 - Premium XS1 Overhaul Gasket Set
Overhaul Gasket Set - Fits: 1970-71 XS1/XS1b 650's - Sets made by Athena of Italy the European original equipment supplier to Yamaha, Honda, Kawasaki, Suzuki and all major Italian bike makers. Top Quality ISO-9000 approved premium gasket kits. Athena...
|
#18-0752 - Premium Big Bore Gasket Set
 Big Bore Overhaul Gasket Set - Fits: 1972-84 650's with 750cc. - Big bore kits Sets made by Athena of Italy the European original equipment supplier to Yamaha, Honda, Kawasaki, Suzuki and all major Italian bike makers. Top Quality ISO-9000 approved premium...
|
#18-0249K - Premium Big Bore Gasket Set 85-88 mm bore
Big Bore Overhaul Gasket Set - Fits: 1972-84 650's with 840-880 cc - Big bore kits Sets made by Athena of Italy the European original equipment supplier to Yamaha, Honda, Kawasaki, Suzuki and all major Italian bike makers. Top Quality ISO-9000 approved...
|
#18-0855 - Top End Engine O-ring Set
 Top End Engine O-ring Set - 16pc. ( included in our Athena gasket sets ) Fits: All 1970-84 650's Kit Contains - 2pc. Cylinder Sleeve O-ring 1.9 x 81.5 # 93210-82153 + 4 pc. Rocker shaft cap O-ring 2.5 x 17 # 93210-17143 + 4pc. Valve - Guide O-Ring 1....
|
#01-0650 - Cylinder Head Sealing Washers
 Cylinder Head Sealing Washers - OEM Ref.# 90210-10004 (4 used per engine) Steel Head washers with internal seal. Used under 4 outer cylinder head crown nuts on all 650's. Note: Not included in gasket sets. OEM Made in Japan Sold in sets of 4.
|
#01-0651 - Cylinder Head Washers
 Brass Cylinder Head Washers - Can be used as a substitute for stock cylinder head sealing washers (#01-0650). Used on four outer cylinder head studs. Fits: All models 1970-84 22mm. OD x 10.5mm ID x 4mm thick. Note: All Cylinder head fasteners should ...
|
#18-0869- Gasket - LH Crankcase Cover (Alternator) '72-'82 models
 Gasket - LH Crankcase Cover. - Fits: 1972-84 650's. OEM Ref.# 306-15461-00
|
#18-0674 - Gasket - LH Crankcase Cover (Alternator) '70-'71 models
 Gasket - LH Crankcase Cover (Alternator) - Fits: 1970-71 XS1/XS1b Only. OEM Ref.# 256-15451-00
|
#18-0864 - Gasket - Right hand crank case Cover (Clutch) '72-'84 models
 Gasket - Right hand crank case Cover (Clutch). - Fits:1970-84 650's OEM Ref.# 256-15451-00
|
#49-0650 - Lower engine Case Screw Set
 Lower engine Case Screw Set. - 18 Pc. bright cadium plated Set fits lower right hand & left hand engine cases on 1970-84 650's.
|
#17-3802 - Copper Drain Plug Crush Gaskets
 Copper Drain Plug Crush Gaskets - (1 PR.) Replaces OEM # 256-15353-00
|
#15-6502 - Magnetic Drain Plug
 Stock type Magnetic Drain Plug. OEM Ref.# 256-15351-00 Fits: All 650's 1970-84 Note: Each engine has 2 drain plugs. price 1 plug !
|
#18-0675 - Headpipe Exhaust Gaskets
 Headpipe Exhaust Gaskets - (Pk./2) - Original Yamaha type - Fits: All 650's 1970-84. OEM Ref.# 256/3GD-14613-00, 90430-38054
|
#18-0865 - Intake Spiggot Gasket
 Gasket - Intake Spiggot ( Carb Manifold Rubber) (Pr.) - Fits: 1970-84 650's OEM Ref.# 256-13556-01
|
#18-0672 - Tappet cover Gasket 4 hole for '70-'72 models
 Tappet cover Gasket (4 Hole) - One piece used on each engine - Fits: All models from 1972-84. Oem Ref.#306-11198-00 - Note: Gasket can be used in place of O-Rings used on some later models.
|
#18-0673 - Tappet cover Gasket 3 hole for '70-'72 models
 Tappet cover Gasket (3 Hole) - Three pieces used on each 1972-84 engine or 4pc. on all 1970-71 engines. Note: Gasket can be used in place of O-Rings used on some later models. OEM Ref.# 256-11196-01
|
Heiden Tuning - Chromiumweg 23 - 3812NL - Amersfoort NL - Phone: 033 2862800 - Fax: 033 2861311 - E-mail: heidentuning@hetnet.nl
