© Powered by SiteSpirit
Switch to: Heiden Tuning / MikesXS
Select product, add to shopping bag and be sure to fill out the CORRECT address!
Shipping 0-5 kg is €15,00 for inside the EU.
Ask for the shipping price outside the EU!
Minimum order amount is 15 euro! Shipping within Europe free (< 5 kg) on orders 150 euro and up.
Sélectionnez les articles, ajoutez les dans votre panier et remplissez votre adresse CORRECTE!
Les frais de port sont de 15€ pour des marchandise de 0 à 5 kg en Europe.
Pour une expédition hors Europe, demandez nous les frais de port!
Le montant minimum dúne commande est de 15€ !
Les frais de port pour l'Europe sont gratuits pour des colis inférieurs à 5 kg et dont le montant est supérieur à 150€.
#HT-0752 - Stainless Steel Bolt
 Steering Head Bolt stainless steel. Fits: All 650's with a steering head post Bolt (not models with a damper). Improved appearance over stock style
|
#49-0752 - Chrome Steering Head Bolt & Washer
 Steering Head Bolt with domed head and matching chrome radiused Washer. Fits: All 650's with a steering head post Bolt (not models with a damper). Improved appearance over stock style.
|
#49-0764 - Cylinder Head Bolt Set
 Cylinder Head Bolt Set - 3pc. Bolt Set with chrome Domed Heads . 1pc. 6mm. bolt (center at rear of cylinder head) + 2pc. of Head Bolts (2 outer bolts located under each spark plug). Fits: All 650's 1970-84.
|
#49-0765 - Crankcase Top Bolt Set
 Engine Crankcase Bolts (Set4). Bolts fasten engine cases together and pass thru cases from the top of the rear portion of the engine. We have replicated the early type attractive Chrome plated Domed head type Bolts and have the 3 sizes in a set of 4....
|
#49-0650 - Lower engine Case Screw Set
 Lower engine Case Screw Set. - 18 Pc. bright cadium plated Set fits lower right hand & left hand engine cases on 1970-84 650's.
|
#49-0731 - Stainless Steel Lock Washers - 8mm
 Stainless Steel Lock Washers - 8mm - Pack/10
|
#49-0730 - Stainless Steel Lock Washers - 6mm
 Stainless Steel Lock Washers - 6mm - Pack/10
|
#49-0714 - Stainless Steel Lock Washers - 10mm
 Stainless Steel Lock Washers - 10mm - Pack/10
|
#49-0733 - Stainless Steel Flat Washers - 8mm
 Stainless Steel Flat Washers - 8mm - Pack/10
|
#49-0732 - Stainless Steel Flat Washers - 6mm
 Stainless Steel Flat Washers - 6mm - Pack/10
|
#49-0734 - Stainless Steel Flat Washers - 10mm
 Stainless Steel Flat Washers - 10mm - Pack/10
|
#49-0247 - Stainless Steel Cylinder Head Nuts
 Stainless steel Crown Nuts for All 650 Cylinder Heads 1970-84. Sold Each. 8 needed for 1 engine.
|
#49-0720 - Oil delivery tube Banjo Bolt
 Oil delivery tube Banjo Bolt - attaches delivery pipe to cylinder head. - Chrome Plated. Fits: All 1970-84 650's - Sold as a Set of 2 only. note : do not overtite this bolts ! max.torque 20 NM !!
|
#66-7883 - Front Fender Mount Bolts
 Bolt Set(4) with Lockwashers(4) to mount the front fender to the front forks. Fits: 78-84 "Special" model front fenders.
|
#01-0651 - Cylinder Head Washers
 Brass Cylinder Head Washers - Can replace all cylinder head sealing washers or all Head Nut Washers used on any 650. 22mm. OD x 10.5mm. ID x 4mm Thick. Price each! So order 4 if you need 4.
|
#49-0704 - Chrome Thick Washer
 Chrome Thick Washer - 10mm. x 27mm. x 4.5mm. - Fits: All Footrest mount bars on 1970-84 650's and shock absorber top mount stud on 1974-79 650's.
|
#51-6518 - Tach Drive retention Bolt
 Bolt - Special Bolt that holds the Tach Drive into the Clutch (RH Engine) Case. Fits: All 650's 1970-84
|
#49-0715 - Shock Mount Crown Nut
 Chrome Shock Crown Nut - Deep Type 17mm hex x 10mm x 1.25pitch x 21mm Long Fits: Shock absorber upper studs on 74-84 650's
|
#49-0703 - Polished Chrome Crown Nut
 Polished Chrome Shock Crown Nut - Short Type 17mm hex x 10mm 1.25pitch x 16mm Long Fits: Shock absorber upper studs on 74-84 650's
|
Heiden Tuning - Chromiumweg 23 - 3812NL - Amersfoort NL - Phone: 033 2862800 - Fax: 033 2861311 - E-mail: heidentuning@hetnet.nl
