© Powered by SiteSpirit
Switch to: Heiden Tuning / MikesXS
Select product, add to shopping bag and be sure to fill out the CORRECT address!
Shipping 0-5 kg is €15,00 for inside the EU.
Ask for the shipping price outside the EU!
Minimum order amount is 15 euro! Shipping within Europe free (< 5 kg) on orders 150 euro and up.
Sélectionnez les articles, ajoutez les dans votre panier et remplissez votre adresse CORRECTE!
Les frais de port sont de 15€ pour des marchandise de 0 à 5 kg en Europe.
Pour une expédition hors Europe, demandez nous les frais de port!
Le montant minimum dúne commande est de 15€ !
Les frais de port pour l'Europe sont gratuits pour des colis inférieurs à 5 kg et dont le montant est supérieur à 150€.
#07-0652 - Replica Muffler Set - Original for XS1/XS1b/XS2/TX650
 Replica Muffler Set - Original for XS1/XS1b/XS2/TX650 (1970-73) and also used for our later model systems #07-0749 and #07-0750. Chrome Plated. 1 each of LH and RH side with hardware. " Best sounding Mufflers ever made for the 650 "
|
#07-0653 - Chrome plated Replica Headpipe Set for XS1/XS1b/XS2,TX650
 Chrome plated Replica Headpipe Set for XS1/XS1b/XS2,TX650 (1970-73) Original Bends, Finned Headpipe Clamps and heavy duty single thickwall construction - 1.25" ID x 1.5" OD. Note: Headpipes are Not for later mode
|
#07-4622 - Muffler Joint Gasket
 Fits into original muffler joint nut as used on stock mufflers on XS1/XS1b/XS2 (1970-72) and 1973 TX650. Also fits to our #07-0749/0750 systems.
|
#07-4621 - Chrome Muffler joint nut
 Chrome Muffler joint nut - Threads onto original XS1/XS1b/XS2 1970-72 & 1973
|
#35-5029 - Ring Wrench
 Ring Wrench to tighten Muffler Joint Nut on Early XS1 type muffler
|
#07-4072 - muffler - clamp `70-`73
 chrome muffler clamp + bracket + bolt set
|
#99-0679 - XS1/2 Passenger Peg/Muffler Bolts
 Special Fine thread metric Bolt that passes thru Passenger pegs, thru frame and into muffler mountings (pk./2 bolts with lock washers) of stock OEM mufflers. Fits: XS1, XS1b, XS2, TX650 (1970-73).
|
#07-4623 - Center Stand Stop Rubber fits to stock muffler on 1970-73 XS/TX 650's
 Center Stand Stop Rubber fits to stock muffler on 1970-73 XS/TX 650's
|
#49-0736 - Exhaust Studs for Cylinder Head
 Exhaust Studs for Cylinder Head - 10mm. x M1.25 x 43mm. Long with plated finish. Fits All 650's 1970-84 Price each! (So order 4 if you need 4)
|
Heiden Tuning - Chromiumweg 23 - 3812NL - Amersfoort NL - Phone: 033 2862800 - Fax: 033 2861311 - E-mail: heidentuning@hetnet.nl
